VNA for smarties
VNA for smarties
1.
INTRODUCTION
2.
SAFETY INSTRUCTIONS
3.
GENERAL OVERVIEW
3.1.
Description
3.2.
Specifications
3.3.
Measurement Capabilities
3.4.
Principle of Operation
4.
PREPARATION FOR USE
4.1.
General Information
4.2.
Software Installation
4.3.
Front Panel
4.4.
Rear Panel
5.
GETTING STARTED
5.1.
Analyzer Preparation for Reflection Measurement
5.2.
Analyzer Presetting
5.3.
Stimulus Setting
5.4.
IF Bandwidth Setting
5.5.
Number of Traces, Measured Parameter and Display Format Setting
5.6.
Trace Scale Setting
5.7.
Analyzer Calibration for Reflection Coefficient Measurement
5.8.
SWR and Reflection Coefficient Phase Analysis Using Markers
6.
SETTING MEASUREMENT CONDITIONS
6.1.
Screen Layout and Functions
6.2.
Channel Window Layout and Functions
6.3.
Quick Channel Setting Using a Mouse
6.4.
Channel and Trace Display Setting
6.5.
Trigger Setting
6.6.
Measurement Parameters Setting
6.7.
Stimulus Setting
6.8.
Format Setting
6.9.
Scale Setting
6.10.
Measurement Optimization
6.11.
Mixer Measurements
7.
CALIBRATION AND CALIBRATION KIT
7.1.
General Information
7.2.
Calibration Procedures
7.3.
Calibration Kit Management
7.4.
Power Calibration
7.5.
Receiver Calibration
7.6.
Scalar Mixer Calibration
7.7.
Vector Mixer Calibration
7.8.
Automatic Calibration Module
8.
MEASUREMENT DATA ANALYSIS
8.1.
Markers
8.2.
Memory Trace Function
8.3.
Fixture Simulation
8.4.
Time Domain Transformation
8.5.
Time Domain Gating
8.6.
S-Parameter Conversion
8.7.
General S-Parameter Conversion
8.8.
Limit Test
8.9.
Ripple Limit Test
9.
ANALYZER DATA OUTPUT
9.1.
Analyzer State
9.2.
Channel State
9.3.
Trace Data CSV File
9.4.
Trace Data Touchstone File
10.
SYSTEM SETTINGS
10.1.
Analyzer Presetting
10.2.
Graph Printing
10.3.
Reference Frequency Oscillator Selection
10.4.
System Correction Setting
10.5.
Beeper Setting
10.6.
User Interface Setting
10.7.
Screen Update Setting
10.8.
Power Meter Setting
10.9.
Port Overload Indication (expect Planar 304/1)
10.10.
Power Trip Function (expect Planar 304/1)
10.11.
Port Switchover Delay Disabling
11.
MAINTENANCE AND STORAGE
11.1.
Maintenance Procedures
11.2.
Storage Instructions
12.
13.
Appendix 1 — Default Settings Table
Powered by
GitBook
VNA for smarties
Specifications
The specifications of each Analyzer model can be found in its corresponding datasheet.